e-design

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Exynos ======
  * [[start:exynos|getting started]]

===== Details =====
==== ODROID U3 ====
{{:details:arm:hardkernel_odroid_u3.jpg?200|}}

  * **CPU** Cortex-A9 1.7GHz Quad-core
  * **MEM** 2GB
  * **FLASH** -
  * micro SD-Card
  * eMMC
  * Jacks for audio, video
  * Ethernet RJ45
  * 3xUSB-Host
  * 1xUSB-OTG (FIXME)
  * a small GPIO header
  * 5V Power

The BCM2835 has a very bad USB controller which may cause a lot of problems!

===== CFLAGS =====
<code>
CHOST=armv6j-hardfloat-linux-gnueabi
CFLAGS=-O2 -pipe -march=armv6j -mtune=arm1176jzf-s -mfpu=vfp -mfloat-abi=hard
</code>

===== Kernel =====
  * {{http://gentoo.ed-solutions.de/kernel/raspberry/all-3.6.11%2b_4-20130301.tar.bz2|all-3.6.11+ #4 (2013.03.01)}}

===== Gentoo =====
==== Binhost ====
<code>
http://gentoo.ed-solutions.de/packages/raspberry_minimal_x/
</code>

<code>
USE=-ipv6 -gpm alsa X -doc -ruby -man sqlite sqlite3 nsplugin -introspection -gstreamer -gdm webgl opengl gtk3 gtk gallium drm dri xorg
</code>

===== Building =====
==== Kernel ====
<code>
# cd /usr/src
# git clone git://github.com/hardkernel/linux
# make uImage
# make modules modules_install
# mount /boot
# cp arch/arm/boot/uImage /boot
</code>

==== u-Boot ====
<code>
# cd /root
# git clone https://github.com/hardkernel/u-boot
# cd uboot
# make distclean 
# make smdk5410_config

</code>
===== Links =====
  * http://www.hardkernel.com/
  * http://hardkernel.com/main/products/prdt_info.php?g_code=G138745696275&tab_idx=2
e-design

User Tools

Site Tools

Page Tools
