e-design

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Getting started with the Aria G25 ======
===== prepare sd-card =====
  * see [[http://www.acmesystems.it/microsd_create|How to create a bootable microSD from binary repositories]]

==== Partition table should look like this ====
<code>
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048       65535       31744   16  Hidden FAT16
/dev/sda2           65536    13737983     6836224   83  Linux
/dev/sda3        13737984    15523839      892928   82  Linux swap / Solaris
</code>

==== Ext4 parameters (/etc/mke2fs.conf) ====
<code bash>
	ext4 = {
		features = has_journal,flex_bg,uninit_bg,dir_nlink
		auto_64-bit_support = 0
	}
</code>

==== Create filesystems ====
<code bash>
mkfs.vfat /dev/sda1
mkfs.ext4 /dev/sda2
mkswap /dev/sda3
</code>


==== Setup boot-partition ====
<code bash>
mount /dev/sda1 /mnt/sda1
cd /mnt/sda1
wget 'http://gentoo.ed-solutions.de/stages/aria25/boot-2013.04.09.tar.bz2'
tar -vjxf boot-2013.04.09.tar.bz2 -C .
rm boot-2013.04.09.tar.bz2
</code>

==== Get kernel uImage ====
<code bash>

</code>

==== Setup root partition ====
<code bash>
mount /dev/sda2 /mnt/sda2
cd /mnt/sda2
wget ''
tar -vjxf -C .
rm 

</code>
===== install kernel (from aria25 shell)=====
  * requires: dev-embedded/u-boot-tools

<code bash>
cd /usr/src/linux
mkimage -A arm -O linux -C none -T kernel -a 20008000 -e 20008000 -n linux-2.6 -d arch/arm/boot/zImage uImage
cp uImage /boot/
</code>

e-design

User Tools

Site Tools

Page Tools